Audio Products

Car audio stuff



1. Model: JBL GTO5355 Amplifier

Grand Touring Series 5-Channel Class AB Car Amplifier
RMS Power Rating:
4 ohms: 55 watts x 4 chan. + 225 watts x 1 chan.
2 ohms: 75 watts x 4 chan. + 360 watts x 1 chan.
Max power output: 125 x 4 chan. + 535 watts x 1 chan. approx. (1035 watts)
LED power and protection indicators
Tuned Bass EQ (0-12 dB bass boost)
Cast-aluminum heatsink
Variable high-pass filter (10-100 Hz, 12 dB/octave)
Variable low-pass filter (32-320 Hz, 12 dB/octave)
CEA-2006 compliant amplifier
Frequency response (Chan. 1-4): 10-83000 Hz
Frequency response (Chan. 5): 20-250 Hz
Dimensions: 18-9/16"L x 10-3/8"W x 2-1/8"H




2. MODEL: DLS Performance CA22 Stereo Amplifier [200W]

Specification
Number of channels 2
Amplifier class AB
Output power in 4 ohm 2 x 60 W
Output power in 2 ohm 2 x 100 W
Mono bridge mode 4 ohm 200 W
Damping factor >100
S/N ratio, A-weighted >100 dB
Frequency range 10 Hz - 35 kHz
Input sensitivity 0,25 - 5 V
Input impedance >10 kohm
Input impedance, high level 100 ohm
High pass filter 15-500 Hz
Low pass filter 50 - 500 Hz
Low level output Yes
High level input with auto start Yes
Power consumption (idle) 0,5 A
Power consumption (max) 25 A
Rec. power cable Minimum 5AWG / 16 mm2
Fuses 1 x 25 A
Dimension (W x D x H) 70 x 230 x 268 mm / 2,92 x 9,06 x 10,55"
Weight 2,7 kg / 5,95 lb

CA 22 is a powerful amplifier with a power output of 2 x 60 Watts. With a mono bridge-connection, it puts out all of 200 Watts.

- Built-in low-pass filter for subwoofers, variable between 50 and 500 Hz.
- The high-pass filter is variable between 15 and 500 Hz.
- Built-in protection circuits shut down the amplifier in the event of overloads.

- High level input with AUTO-start function makes it easier to connect to factory installed head units.
- RMS output power @ 13,8 V, 20Hz - 20 kHz




3. MODEL: DLS Performance CA23 Stereo Amplifier [400W]

Specifications
Number of channels 2
Amplifier class AB
Output power in 4 ohm 2 x 135 W
Output power in 2 ohm 2 x 200 W
Mono bridge mode 4 ohm 400 W
Damping factor >100
S/N ratio, A-weighted >100 dB
Frequency range 10 Hz - 35 kHz
Input sensitivity 0,25 - 5 V
Input impedance > 10 kohm
Input impedance, high level 100 ohm
High pass filter 15 - 150 Hz
Low pass filter 50 - 500 Hz
Grand bass filter 25 - 80 Hz, 0-18 dB
Low level output Yes
High level input with auto start Yes
Power consumption (idle) 0,7 A
Power consumption (max) 60 A
Rec. power cable Minimum 5AWG / 16 mm2
Dimension (W x D x H) 70 x 312 x 268 mm (2,92 x 12,28 x 10,55 inch)
Fuses 2 x 30 A
Weight 3,6 kg ( 7,9 lb)

CA 23 is a powerful amplifier with a power output of 2 x 135 Watts.
With a mono bridge-connection, it puts out all of 400 Watts.

- Built-in low-pass filter for subwoofers, variable between 50 and 500 Hz.
- Bass boost control from 25 Hz - 80 Hz, 0-18 dB.

- Built-in protection circuits shut down the amplifier in the event of overloads.

- High level input with automatic start.
- RMS output power @ 13,8 V, 20Hz - 20 kHz





4. MODEL: DLS Performance CA31- 2 x 65 W + 1 x 170 W 3 - Ch amplifier

Specifications
Number of channels 3
Amplifier class AB
Output power in 4 ohm 2 x 65 W
Output power in 2 ohm 2 x 90 W
Mono sub channel 4 ohm 170 W
Mono bridge mode 4 ohm N/A
Mono sub channel 2 ohm 280 W
Damping factor >100
S/N ratio, A-weighted >100 dB
Frequency range 10 Hz - 35 kHz
Input sensitivity 0,25 - 5 V
Input impedance >10 kohm
Input impedance, high level 100 ohm
Filters channel A & B HP: 50-150 Hz
Filter sub channel Lowpass: 50 - 120 Hz + subsonic 25 Hz
Low level output No
High level input with auto start Yes
Power consumption (idle) 1A
Power consumption (max) 60A
Rec. power cable Minimum 4AWG / 21 mm2
Fuses 2 x 30 A
Dimension (W x D x H) 70 x 357 x 268 mm (2,92 x 14,06 x 10,55 inch)
Weight 4 kg ( 8,8 lb)

CA31 is a three channel amplifier with a nominal output of 2 x 65 Watts + 1 x 170 Watts (1 x 280 Watts in 2 ohm).

- Built-in high-pass, low-pass and subsonic filters.
- Variable phase control on sub channel.
- Protection circuits shut down the amplifier in the event of overloads.
- High level input with auto start.

The perfect amplifier for a standard installation with a front system in stereo and a subwoofer in the back.
- RMS output power @ 13,8 V, 20Hz - 20 kHz





5. MODEL: DLS Performance CA51 - 4 x 50 W + 1 x 170 W - 5 ch Amplifier

Specifications
Number of channels 5
Amplifier class AB
Output power in 4 ohm 4 x 50 W
Output power in 2 ohm 4 x 80 W
Mono bridge mode 4 ohm 2 x 150 W
Mono sub channel 4 ohm 170 W
Mono sub channel 2 ohm 225 W
Damping factor > 100
S/N ratio, A-weighted > 100 dB
Frequency range 10 Hz - 35 kHz
Input sensitivity 0,25 - 5 V
Input impedance > 10 kohm
Input impedance, high level 100 ohm
Filters channel A & B HP: 15-500 Hz. LP: 50-500 Hz / 05 - 5 kHz (x10)
Low level output No
Filters channel C & D HP: 15-500 Hz / 150 Hz - 5 kHz (x10).
Filters channel E LP: 60 - 120 Hz + subsonic 25 Hz
High level input with auto start Yes
Power consumption (idle) 1 A
Power consumption (max) 90 A
Rec. power cable Minimum 4AWG / 21 mm2
Fuses 3 x 30 A
Dimension (W x D x H) 70 x 437 x 268 mm / 2,92 x 17,2 x 10,55 "
Weight 5 kg / 11 lb

CA51, now in a new exclusive design, but the inside is of the same high quality as before. CA 51 is an amplifier suitable for full in-car entertainment systems. Nominal output of 4 x 50 Watts + 1 x 170 Watts on a mono sub channel. Built-in low-pass and high-pass filters. Variable phase shift control on the sub channel. Built-in protection circuits shut down the amplifier in the event of overloads. High level input with auto start.
- RMS output power @ 13,8 V, 20Hz - 20 kHz

6. MODEL: DLS Performance CAD15 Mono Amplifier [1600W]

Specifications
Number of channels 1
Amplifier class D
Output power in 4 ohm 550 W
Output power in 2 ohm 900 W
Output power in 1 ohm 1600 W
Mono bridge mode 4 ohm N/A
Damping factor > 100
S/N ratio, A-weighted > 100 dB
Frequency range 15 - 160 Hz
Input sensitivity 0,15 - 5 V
Input impedance > 10 kohm
Input impedance, high level 100 ohm
High pass filter 15-50 Hz / 24 dB slope
Low pass filter 15-150 Hz / 24 dB slope
Phase control for subwoofers 0-180 grader kont. variabel
Low level output No
Grand bass filter 0-+18 dB@45 Hz
Remote bass level control Yes
High level input with auto start Yes
Integrated fan Yes
Power consumption (idle) 2 A
Power consumption (max) 160 A
Rec. power cable Minimum 2AWG / 33 mm2
Fuses 4 x 40 A
Dimension (W x D x H) 70 x 473 x 268 mm (2,92 x 18,62 x 10,55 inches)
Weight 6,4 kg ( 14,3 lb)

CAD15 is a very powerful mono amplifier with a nominal power of 1600 Watts in 1 ohm load. In 4 ohm load the output is 550 Watts, and in 2 ohms 900 Watts. CAD15 is a digital class D amplifier.

- Built-in variable low pass filter 15 - 150 Hz.
- Variable subsonic filter 15-50 Hz with 24 dB slope.
- Adjustable bass boost 0- +18 dB.
- Built-in phase control variable 0-180 degrees.
- With the remote control you can adjust the level from your front seat.
- Built-in protection circuits shut down the amplifier in the event of overloads.
- Built-in fan to prevent from overheating.
- Can be connected in bridge mode together with a second CAD15 for 3,2 kliowatt of R.M.S. output power.
- RMS output per channel at 13,8 volts. .
- Can handle 50 sq. mm (AWG0) on the DC terminal.




7. MODEL: DLS Performance RA10 Mono Amplifier [780W]

Specifications
Number of channels 1
Amplifier class AB
Mono bridge mode 4 ohm N/A
Output power in 4 ohm 300 W
Output power in 2 ohm 500 W
Output power in 1 ohm 780 W
Damping factor > 200
S/N ratio, A-weighted > 100 dB
Frequency range 10 Hz - 125 Hz
Input sensitivity 0,5 - 8 V
Low level output No
Input impedance > 10 kohm
Input impedance, high level 330 ohm
Phase control for subwoofers 0-180 degrees variable
High pass filter Subsonic 25 Hz / 18 dB slope
Low pass filter 40-125 Hz / 12 db slope
Grand bass filter 0-18 dB @ 40 Hz
High level input with auto start Yes
Remote phase shift control Yes
Remote bass level control Yes
Integrated fan Yes
Power consumption (idle) 0,6A
Power consumption (max) 120 A
Rec. power cable Minimum 2AWG / 33 mm2
Fuses 4 x 30 A
Dimension (W x D x H) 359 x 245 x 59 mm (14,1 x 9,65 x 2,33 inch)
Weight 4,3 kg ( 9,5 lb)




8. MODEL: DLS Performance RA20 Stereo Amplifier [440W]

Specifications
Number of channels 2
Amplifier class AB
Output power in 4 ohm 2 x 130 W
Output power in 2 ohm 2 x 200 W
Mono bridge mode 4 ohm 440 W
Damping factor > 200
S/N ratio, A-weighted > 100 dB
Frequency range 10 Hz - 50 kHz
Input sensitivity 0,2 - 7 V
Input impedance > 10 kohm
Input impedance, high level 330 ohm
High pass filter 20 - 150 Hz
Low pass filter 40 - 125 Hz
Grand bass filter 0-18 dB @ 40 Hz
Low level output No
High level input with auto start Yes
Power consumption (idle) 0,6 A
Power consumption (max) 50 A
Rec. power cable Minimum 4AWG / 21 mm2
Fuses 2 x 25 A
Dimension (W x D x H) 359 x 245 x 59 mm (14,1 x 9,65 x 2,33 inch)
Weight 3,8 kg ( 8,4 lb)




9. MODEL: DLS Performance RA25 Stereo Amplifier [220W]

Specifications
Number of channels 2
Amplifier class AB
Output power in 4 ohm 2 x 70 W
Output power in 2 ohm 2 x 110 W
Mono bridge mode 4 ohm 220 W
Damping factor > 200
S/N ratio, A-weighted > 100 dB
Frequency range 10 Hz - 50 kHz
Input sensitivity 0,2 - 7 V
Input impedance > 10 kohm
Input impedance, high level 330 ohm
High pass filter 20 - 150 Hz
High level input with auto start Yes
Power consumption (idle) 0,6A
Low level output No
Power consumption (max) 25 A
Rec. power cable Minimum 5AWG / 16 mm2
Fuses 1 x 25 A
Dimension (W x D x H) 247 x 245 x 59 mm (9,72 x 9,65 x 2,33 inch)
Weight 2,6 kg ( 5,7 lb)




10. MODEL: DLS Performance RA30 2 x 70 W + 1 x 265 W - 3 Ch Amplifier

Specifications
Number of channels 3
Amplifier class AB
Output power in 4 ohm 2 x 70 W
Output power in 2 ohm 2 x 100 W
Mono sub channel 4 ohm 265 W
Mono bridge mode 4 ohm N/A
Mono sub channel 2 ohm 365 W
Damping factor > 200
S/N ratio, A-weighted > 100 dB
Frequency range 10 Hz - 50 kHz
Input sensitivity 0,2 - 7 V
Input impedance < 10 kohm
Input impedance, high level 330 ohm
High level input with auto start Yes
Remote bass level control Yes
Low level output No
Remote phase shift control Yes
Filters channel A & B HP: 45 - 125 Hz
Phase control for subwoofers 0-180 degrees variable
Grand bass filter 0-18 dB @40 Hz
Power consumption (idle) 0,9 A
Power consumption (max) 70 A
Rec. power cable Minimum 4AWG / 21 mm2
Fuses 2 x 35 A
Dimension (W x D x H) 385 x 245 x 59 mm (15,15 x 9,65 x 2,33 inch)
Weight 4,4 kg ( 9,7 lb)

nice items papi!!!! ilike haha

pila ni sila in petot?

11. MODEL: DLS Performance RA50 - 4 x 70 W + 1 x 265 W - 5 Ch Amplifier

Specifications
Number of channels 5
Amplifier class AB
Output power in 4 ohm 4 x 70 W
Output power in 2 ohm 4 x 110 W
Mono bridge mode 4 ohm 2 x 220 W
Mono sub channel 4 ohm 265 W
Mono sub channel 2 ohm 365 W
Damping factor >200
S/N ratio, A-weighted >100 dB
Frequency range 10 Hz - 50 kHz
Input sensitivity 0, 5 - 8 V
Input impedance > 10 kohm
Input impedance, high level 330 ohm
Filters channel A & B HP: 50-140 Hz, LP: 250/2,5 kHz - 700/7 kHz (x1, x10 switch)
Phase control for subwoofers 0-180 degrees variable
Filters channel C & D HP: 50/250/2,5 kHz - 140/700/7 kHz (x1, x5, x50 switch
Filters channel E LP 40 - 125 Hz, Subsonic 25 Hz
Grand bass filter 0 - +18 dB @40 Hz
Low level output No
Remote bass level control Yes
Remote phase shift control Yes
High level input with auto start Yes
Power consumption (idle) 1,2 A
Power consumption (max) 90 A
Rec. power cable Minimum 4AWG / 21 mm2
Dimension (W x D x H) 479 x 245 x 59 mm (18,85 x 9,65 x 2,33 inch)
Weight 5,5 kg ( 12,1 lb)

REFERENCE series RA50 is a 5-channel amplifier rated at 4 x 70 + 1 x 265 Watts. The amplifier is 2 ohm stable on all channels.

- Built-in variable 40-125 Hz switchable low-pass filter as well as subsonic filter for subwoofers.
- Built-in filters that allows active crossover to a 2-way system or a mid bass speaker in a 3-way system.
- Grand bass 0-18 dB
- Phase shift control.
- High level input with automatic start.
- RMS output power @ 13, 8 volt DC feed with max max 0,1 % distortion, 20 Hz - 20 kHz.
- The DC input accepts up to 21 sq mm cable / 4AWG




12. MODEL: Focal Access 30 A1 (500]


30 cm, 12-inch subwoofer designed for vented enclosures
94db sensitivity
500 Watts maximum power handling with 4-ohm impedance
250 Watts Nominal power
Frequency Response 27- 500 Hz
Durable, humidity-resistant woven glass fiber cone material with NBR surround
Gasket supplied for better chassis damping and blocking air leak
Two-inch, four-layer voice coil for higher power handling





13. Model: Focal FP2.75 Amplifier

Nominal Power: 13.8V continuously @ 4 Ohms 2x75W RMS
13.8V continuously @ 2 Ohms 2x100W RMS
Bridged Power: 13.8V continuously @ 4 Ohms 1x200W RMS
Signal/noise ratio >100dB (A)
Damping factor at 4 >500
Frequency response (±1dB) 10Hz-35Hz
Input impedance 13k
Input sensitivity 0.2-5V
Variable high-pass filter crossover 50-150Hz (12dB/oct.)
Variable low-pass crossover 50-150Hz (12dB/oct.)





14. MODEL: Focal Access 690C A1 [500]

6" x 9" 2-Way Car Speakers
Power Handling:
Peak: 300 watts per pair / 150 watts each
RMS: 150 watts per pair / 75 watts each
Polypropylene cone woofer
Butyl rubber surround
Orientable, aluminum inverted dome tweeter
4 ohms impedance
30mm Voice coil
90mm Magnet structure





15. MODEL: Focal Access 165A1, 6.5 inches [120W]

6-1/2" Access 1 Series 2-Way Component System
Power Handling:
Peak: 240 watts per set / 120 watts each side
RMS: 120 watts per set / 60 watts each side
Butyl rubber surround
Aluminum, inverted dome tweeter
4 ohms impedance
25mm Voice coil
85mm Magnet structure

16. MODEL: Focal Polyglass 165CVX, 6.5 inches [140W]

6-1/2" CV Series Speakers
Power Handling:
Peak: 280 watts per pair / 140 watts each
RMS: 140 watts per pair / 70 watts each
Polyglass cone woofer
Butyl rubber surround
1" Adjustable inverted dome tweeter
Built-in audiophile crossover
Treble level controls on crossover allows for better integration to various locations
4 ohms impedance
1" 2-Layer Copper Kapton voice coil
11oz. Magnet
Top-mount depth: 2-3/4"





17. MODEL: KICKER S12L7 (1500/750] SOLO-BARIC L7


Model Solo-Baric L7 12
Size (IN.,CM) 12, 30.5
Impedance (OHMS) 4 DVC
Max Rec Amplifier Power (WATTS PEAK/RMS) 1500/750
Sensitivity (dB 1w/1m) 88.6
Frequency Response (Hz) 20-100
Mounting Depth (IN.,CM) 6-11/16, 16.9
Mounting Cutout, Square (IN.,CM) 11-1/16, 28.1
Min Rec Sealed Box Volume (CU. FT., Liters) .88, 24.9
Max Rec Sealed Box Volume (CU. FT., Liters) 2.0, 56.6
Min Rec Vented Box Volume (CU. Ft., Liters) 1.75, 49.6
Max Rec Vented Box Volume (CU. Ft., Liters) 3.25, 92.1





18. Model: KICKER ZX350.4 Amplifier

ZX Series 4-Channel Class AB Car Amplifier
RMS Power Rating:
4 ohms: 60 watts x 4 chan.
2 ohms: 90 watts x 4 chan.
Bridged, 4 ohms: 175 watts x 2 chan.
Max power output: 700 watts.
MOSFET power supply
Wired remote bass level control included
LED power and protection indicators
Tuned Bass EQ (0-18 dB bass boost at 40 Hz)
Balanced differential inputs make KICKER ZX Amplifiers compatible with any factory radios
Boost, gain, and crossover frequencies are top-mounted for easy access, and a handy protection indicator featuring a new flashing yellow low-voltage light enhances the end panel
Bridgeable operation
Speaker-level inputs compatible (switchable) through RCA connection,
Automatic turn on modes: remote, DC offset, or signal sense
Thermal, voltage, and short circuit protection circuitry
Variable high-pass filter (50-200 Hz, 12 dB/octave)
Variable low-pass filter (50-200 Hz, 12 dB/octave)
CEA-2006 compliant amplifier
Frequency response: 20-20000 Hz
Dimensions: 13-1/2"L x 9-5/8"W x 2-1/8"H





19. Model: KICKER ZX550.3 Amplifier

ZX Series 3-Channel Class AB with Class D Subwoofer Channel Car Amplifier
Channel 1 + 2 RMS Power Rating:
4 ohms: 70 watts x 2 chan.
2 ohms: 85 watts x 2 chan.
Subwoofer Channel RMS Power Rating:
4 ohms: 210 watts x 1 chan.
2 ohms: 420 watts x 1 chan.
Max power output: 1100 watts approx.
MOSFET power supply
Wired remote bass level control included
LED power and protection indicators
Tuned Bass EQ (0-18 dB bass boost at 40 Hz)
Balanced differential inputs make KICKER ZX Amplifiers compatible with any factory radios
Boost, gain, and crossover frequencies are top-mounted for easy access, and a handy protection indicator featuring a new flashing yellow low-voltage light enhances the end panel
Bridgeable operation
Speaker-level inputs compatible (switchable) through RCA connection
Automatic turn on modes: remote, DC offset, or signal sense
Thermal, voltage, and short circuit protection circuitry
Variable high-pass filter (50-200 Hz, 12 dB/octave)
Subsonic Filter (24 dB at 25 Hz)
CEA-2006 compliant amplifier
Frequency response: 20-20000 Hz
Dimensions: 16-3/4"L x 9-5/8"W x 2-1/8"H





20. MODEL: DLS Performance DLS-960 Co-Axial Speakers [120W]

Woofer size 6" x 9" (185 x 249 mm
Tweeter 20 mm (0,8") tweeter / 50 mm (2") midrange
Power handling capacity 80 W RMS / 120 W max
Impedance 4 ohm
Frequency range 50 - 20.000 Hz
Sensitivity 93 dB (1W/1m)
Crossover Integrated filter with 6/12 dB slope
Outer diameter of woofer 185 x 249 mm (7,3 x 9,8")
Magnet size 100 mm (3,94")
Mounting depth 83 mm ( 3,27")
Mounting hole 150 x 220 mm (5,9 x 8,7")

21. MODEL: DLS Performance DLS-B6A, 6.5 inches [150W]


Woofer size 16,5 cm / 6,5"
Tweeter 16 mm / 0,63"
Power handling capacity 50 W RMS / 80 W max / 150 W peak power
Impedance 4 ohm
Frequency range 50-18.000 Hz
Sensitivity 91 dB (1W/1m)
Crossover Cable filter with 12/12 dB slope (LP/HP)
Crossover point (Hz) 6000 Hz
Size of filter box 60 x 30 x 30 mm (2,36 x 1,25 x 1,25")
Outer diameter of woofer 165 mm / 6,5"
Magnet size 80 mm / 3,15"
Mounting depth 63 mm / 2,48"
Mounting hole 146 mm / 5,75"





22. Model: KICKER DX300.2 Amplifier

Model DX300.2
RMS Power in Watts, all channels driven
@14.4 Volts, 4ohms stereo 75 x 2
@ 2ohms stereo 150 x 2
@ 4ohms mono 300 x 1
Length: in (cm) 15 (38.1)
Height: in (mm) 2 1/8 (54mm)
Width: in (mm) 8 5/16 (211mm)
Frequency Response, ± 1 db: 20 Hz - 20 kHz
Signal-to-Noise Ratio: >95db, a-weighted, re: rated power
Input Sensitivity: Low Level: 125mV-5V
High Level 250mV-10V
Selectable Electronic Crossover: 18 db/Octave High Pass Fixed @ 100Hz
18 db/Octave Low Pass Fixed @ 80Hz
Bass Boost: 9db Bass Boost Switch Fixed @ 40Hz





23. MODEL: KICKER DS6930 Oval 6x9 Speakers

Model DS6930
Woofer (in., cm) 6x9, 16x23.0
Mid (in., cm) 2-1/2, 6.4
Tweeter (in., cm) 1/2, 1.3
Impedance (Ohms) 4
Max Rec Amp Power (watts PEAK/RMS) 140/70
Sensitivity (dB 1w/1m) 92
Frequency Response (Hz) 30-20k
Mounting Hole Diameter (in., cm) 5-15/16x8-3/4, 15.1x22.2
Mounting Depth (in., cm) 3-1/4, 8.3
Grilles Yes





24. Model: KICKER 05BTPN3

Maximum Output Gauge Size
1/0
Maximum Number of Outputs
3
Battery Terminal Polarity
Positive or Negative





25. Model: KICKER ZX150.2 Amplifier

ZX Series 2-Channel Class AB Car Amplifier
RMS Power Rating:
4 ohms: 60 watts x 2 chan.
2 ohms: 75 watts x 2 chan.
Bridged, 4 ohms: 150 watts x 1 chan.
Max power output: 350watts.
MOSFET power supply
LED power and protection indicators
Tuned Bass EQ (0-18 dB bass boost at 40 Hz)
Balanced differential inputs make KICKER ZX Amplifiers compatible with any factory radios
Boost, gain, and crossover frequencies are top-mounted for easy access, and a handy protection indicator featuring a new flashing yellow low-voltage light enhances the end panel
Bridgeable operation
Speaker-level inputs compatible (switchable) through RCA connection,
Preamp RCA outputs
Automatic turn on modes: remote, DC offset, or signal sense
Thermal, voltage, and short circuit protection circuitry
Variable high-pass filter (50-200 Hz, 12 dB/octave)
Variable low-pass filter (50-200 Hz, 12 dB/octave)
CEA-2006 compliant amplifier
Frequency response: 20-20000 Hz
Dimensions: 10-1/4"L x 9-5/8"W x 2-1/8"H





26. Model: KICKER 05DB1448 Distribution Block

Distribution Block Type
Non-fused
Maximum Number of Inputs
2
Maximum Input Gauge Size
1/0
Maximum Number of Outputs
4
Maximum Output Gauge Size
4

price list muh pre?

If you are going to get DLS amplifiers for Seps get the reference series rather than the performance. If you want pure power for subwoofers get the CAD11 or CAD15, Its strappable. The cad doesnt trip off and it can survive drowning..hehe nalumos isa k ka cad11 asta subng ga andar gypon. DLS amps have great worksmanship and quality

Pare jrey. Ang mga CA nga amps ang performance. Reference ang RA

PM ko lang ang price list kung sino interesado..

@adi - basta gin copy ko lang na dri..

this week lang nag abot ang mga DLS

@ jrey, prices pls.. in pesos

blueboy1 wrote:

@ jrey, prices pls.. in pesos

send ko lang sa PM mo..hehehe